Nomor Item: LYRO6-63

Spesifikasi Kunci:

Data Teknis
Standard: lEC61009-1 GB16917.1
Mode: Electronic
Type: AVAC
Tripping curve: B C D
Pole No.: 1P+N,2P3P,3P+N,4P
Rated voltage: 240/415V~
Frekuensi terukur: 50/60Hz
Rated current: 6-63A
Rated residual operating current(lAn):30、100、300mA
Residual operating current range: 0.5 1Δn~lAn
Rated breaking capacity(lcn):6000A、10000A
Energy limiting class: 3
Electrical and Mechanical life: 20000

Dapatkan Penawaran Sekarang

    The LYRO6-63 RCBO is a residual current circuit breaker with integrated overcurrent protection, designed to protect both people and electrical circuits in low-voltage AC distribution systems.

    🔹 Pengetahuan Teknis Utama
    Jenis perlindungan: Perlindungan arus residual + perlindungan termal-magnetik
    Konfigurasi pole: 1P+N
    Arus terukur: Hingga 63A.
    Instalasi: Rel DIN 35 mm
    Kepatuhan: standar IEC / EN 61009
    Manufacturer role: Factory-direct RCBO manufacturer with OEM capability

    🔹 Why choose LYRO6-63?
    Integrated leakage and overcurrent protection in one device
    Reduces wiring complexity compared with separate RCD + MCB
    Reliable tripping performance for residential and commercial use

    🔹 Keunggulan OEM & Manufaktur
    As an experienced RCBO factory, we provide bulk supply, OEM branding, and customized residual current parameters for global distributors and panel builders.

    🔹 Kasus Penggunaan / Industri

    • Papan distribusi residensial

    • Panel listrik komersial

    • Office & retail power circuits

    • Electrical contractors and panel builders

    Instalasi

      Fault current in dicator YES
      Derajat perlindungan IP20
      Suhu ambient 25℃~+40℃ and its average over a period of 24h does not exceed +35℃
      Temperatur penyimpanan -25°C~+70℃
      Terminal connection type Cable/U-type busbar/Pin-type busbar
      Terminal size top for cable 25mm²
      Tightening torque 2.5N.m
      Pemasangan On DIN rail FN 60715 (35mm)by means of fast clip device
      Koneksi Top and bottom

    Karakteristik Perlindungan Arus Lebih

    Test procedure Tipe Arus Uji Keadaan Awal Tripping or Non-tripping Time Limit Expected Result Remark
    a B,C,D 1.13in cold t≤1h no tripping
    b B,C,D 1.45In after test a t<1h tripping The current steadily rises to
    the specified valuewithin 5s
    C B,C,D 2.55In cold 1s<t<60s tripping
    d B 3In cold t≤0.1s no tripping Turn on the auxiliary switch to
    close the current
    C 5In
    D 10In
    e B 5In cold t<0.1s tripping Turn on theauxiliary switch to
    close the current
    C 10in
    D 20In

    Residual Current Operating Breaking Time

    Tipe In/A I△n/A Residual Current (I△)Is Corresponding To The Following Breaking Time (S)
    AC Type any
    nilai
    any
    nilai
    1In 2In 5In 5A,10A,20A,50A
    100A,200A,500A
    A Type >0.01 1.4In 2.8In 7In
    0.3 0.15 0.04 Max Break-time
    The general type RCBO whose current I△n is 0.03mA or less can use 0.25A instead of 5I△n.

    Dimensions& Packaging

    FAQ For LYRO6-63 RCBO

    1. What is the LYRO6-63 RCBO used for?
    The LYRO6-63 is a residual current circuit breaker with overcurrent protection (RCBO) designed to disconnect circuits during leakage faults and overcurrent conditions in low-voltage AC systems.

    2. What protection technologies are integrated in this model?
    It combines earth leakage detection dengan thermal-magnetic overcurrent protection, making it a dual-function device for enhanced electrical safety.

    3. What pole configuration does the LYRO6-63 support?
    This RCBO features a konfigurasi 1P+N, allowing simultaneous protection of phase and neutral conductors.

    4. Is the LYRO6-63 suitable for DIN rail installation?
    Ya. Ini mendukung standard 35 mm DIN rail mounting, enabling easy integration into consumer units and distribution boards.

    5. Does this product comply with international safety standards?
    Yes. It is manufactured according to IEC / EN 61009 series standards, ensuring global market acceptance.

    6. Can I order customized versions of the LYRO6-63?
    Sebagai produsen RCBO profesional dan pemasok pabrik, kami menawarkan Kustomisasi OEM/ODM, including labeling, packaging, and technical specifications for distributors.

    Mulai Kustomisasi Sekarang

    Kami menawarkan berbagai layanan yang disesuaikan, bekerja sama dengan pelanggan kami di setiap langkah, dari desain konsep hingga pengiriman akhir.

    Produk Lainnya

    Tim kami selalu dipandu oleh kebutuhan pelanggan kami, memberikan konsultasi dan dukungan profesional untuk memastikan kepuasan Anda.

    APA YANG TIDAK BISA ANDA TEMUKAN?

    Bicaralah Dengan Penjualan Kami

    Kami tahu bahwa setiap bisnis unik, jadi kami menawarkan layanan kustom untuk memastikan bahwa produk kami cocok sempurna dengan kebutuhan spesifik Anda:

    • Brosur komprehensif yang dapat Anda unduh
    • Pengalaman pabrik selama 15 tahun
    • Pengiriman cepat
    • OEM&ODM
    • Harga rendah
    • MQQ kecil

    KIRIM KEPADA KAMI EMAIL

    devin@cnspd.com

    Hubungi Kami

    Kami terus menilai dan meningkatkan proses kami untuk memastikan bahwa kami memberikan produk listrik yang paling efisien dan dapat diandalkan di pasar.