Reliable Type 2 AC Surge Protection for Two-Pole Circuits
LY1-C40/2(S) is a two-pole pluggable Type 2 AC surge protective device designed for low-voltage distribution boards and equipment panels. Its high-energy MOV modules help limit lightning-induced and switching overvoltage through L-PE and N-PE protection paths, while the replaceable cartridge design simplifies inspection and maintenance.
Class II / Type 2 surge protection for low-voltage AC systems
Two-pole design with L-PE and N-PE protection paths
Arus nominal 20kA dan arus maksimum 40kA
Pluggable cartridges with visual indication and optional remote contact
Aplikasi Yang Sesuai
LY1-C40/2(S) is suitable for low-voltage AC systems requiring two-pole Type 2 surge protection through L-PE and N-PE protection paths.
Papan Distribusi
For Type 2 surge protection in residential, commercial, and industrial AC distribution panels.
Control Cabinets
Suitable for machinery controls, automation cabinets, HVAC equipment, and electrical control systems.
Gedung Komersial
Helps protect office, retail, and building electrical systems against transient overvoltage.
Solar Inverter AC Panels
For solar inverter AC-side panels when the selected Uc version matches the system voltage.
FAQ
Common questions about LY1-C40/2(S) two-pole pluggable Type 2 AC surge protective device selection and installation.
Apa kegunaan LY1-C40/2(S)?
LY1-C40/2(S) digunakan untuk membatasi overvoltase transien dalam sistem distribusi AC tegangan rendah melalui dua jalur perlindungan. Ini cocok untuk panel distribusi, kabinet kontrol, sistem daya komersial, dan panel peralatan.
Apakah LY1-C40/2(S) adalah SPD satu kutub atau dua kutub?
LY1-C40/2(S) adalah SPD dua kutub. Judul halaman yang ada yang menyebutnya sebagai kutub tunggal harus diubah menjadi kutub dua.
Apakah produk ini merupakan SPD Tipe 2?
Yes. LY1-C40/2(S) is classified as a Class II / Type 2 AC surge protective device. The incorrect Type 1CA wording should not be used.
Apa rating arus pengeluaran yang disediakan?
The SPD provides 20kA nominal discharge current In and 40kA maximum discharge current Imax. The technical table also lists a 7kA impulse-current parameter.
Opsi tegangan apa yang tersedia?
Maximum continuous operating voltage options include 75V, 150V, 275V, 320V, 385V, and 440V AC. Select the appropriate version according to the nominal system voltage.
Apa yang harus dikonfirmasi sebelum memesan?
Confirm the nominal voltage, Uc and Up requirements, two-pole protection arrangement, 125A maximum backup-fuse coordination, conductor size, DIN-rail space, and optional remote-contact requirement.
