LY1-C40PV/2(S) 1000V PLUGGABLE SINGLE-POLE SPD

Item No.: LY1-C40PV/2(S)

Description：

Class I • Class II • Type 1 • Type 2
Location of Use: Sub-Distribution Boards
Mode of Protection: (DC+) – PE, (DC-) – PE
Surge Ratings: In = 20 kA (8/20 μs)
IEC/EN/UL Category: Class I+II / Type 1+2
Protective Elements: High Energy MOV
Housing: Pluggable Design
Compliance: IEC 61643-31:2018 EN 50539-11:2013+A1:2014

Technical Data

IEC Electrical		1000
Nominal AC Voltage U_o/ U_n		1000 V
Maximum Continuous Operating Voltage (DC) U_c		1000 V
Nominal Discharge Current (8/20 μs) I_n		20 kA
Maximum Discharge Current (8/20 μs) I_max		40 kA
Impulse Discharge Current (10/350 μs) I_imp			6.25 kA
Voltage Protection Level	U_p	3.6 kV
Response Time	t_A	< 25 ns
Back-Up Fuse (max)		125 A gL / gG
Short-Circuit Current Rating (AC) I_SCCR		25 kA / 50 kA
Mechanical & Environmental
Operating Temperature Range	T_a	-40ºF to +158ºF [-40ºC to +70ºC]
Permissible Operating Humidity	RH	5%…95%
Atmospheric pressure and altitude		80k Pa … 106k Pa / -500 m…..2000 m
Terminal Screw Torque	M_max	39.9 Ibf ·in [4.5 Nm]
Conductor Cross Section (max)		2 AWG (Solid, Stranded) / 4 AWG (Flexible)
		35 mm2 (Solid, Stranded) / 25 mm2(Flexible)
Mounting		35 mm DIN Rail, EN 60715
Degree of Protection		IP 20 (built-in)
Housing Material		Thermoplastic: Extinguishing Degree UL 94 V-0
Thermal Protection		Yes
Operating State / Fault Indication		Green ok / Red defect
Remote Contacts (RC)RC Switching CapacityRC Conductor Cross Section (max)		OptionalAC: 250V / 0.5 A; DC: 250V / 0.1 A;125V / 0.2 A;75V / 0.5 A16 AWG (Solid) / 1.5 mm2(Solid)