LY26-XF Explosion-proof waterproof series Potential connector
LY26-XF Explosion-proof waterproof series Potential connector
Product overview
The waterproof explosion-proof product is suitable for lightning and surge overvoltage protection of 485 data transmission control lines, data communications lines and on-site control signal lines.
Features
1.The product uses imported semiconductor clamping components through strict quality control, it has stable performance, has multi-level protection and reasonable match between levels.
2.Fast response to overvoltage (action time is less than 1ns).
3.Accurate clamping, low output residual voltage, small insertion loss, dual overcurrent protection function, reasonable match between levels, all these greatly ensures the safety of protected equipment.
4.Waterproof and explosion-proof data signal SPD is pioneering technology in China; it can be applied to overvoltage protection for outdoor and explosion-proof signal lines.
5.The product is typically used in overvoltage protection for data control, field control, data communications and other signal lines in workshops of chemical plants, gas station tanker, gas storage, oil depots,chemical warehouses and other inflammable and explosive occasions.
6.The product also applies to overvoltage protection for signal lines of security, information technology and other systems in outdoors where requests waterproof and moisture proof.
Applications and installation location
This series of product is installed at the interface of data line equipment from LPZ1 area to LPZ3 area.
lt applies to overvoltage protection for outdoor security equipment (such as monitoring, cordon prevention,itlligent,firefighting, etc. ) it does not need to install waterproof device.
lt applies to overvoltage protection for signal lines of automatic control equipment in fammable and explosive places such as oil depots, gas storage, gas stations, chemical plants, warehouses and other places , it should be sealed connection to the original explosion-proof device.All wiring must be strongly protected and reliably connected; lightning protection and grounding should comply wit lightning protection requirements and the ground wire should be as short and straight as possible.
Specifications
| Model | LY26-XF | |||||
| Rated operating voltage Un (V) | 5V | 12V | 24V | 48V | 110V | 220V |
| Max continuous voltage Uc (V) | 6V | 15V | 30V | 50V | 230V | 420V |
| Nominal discharge current (8/20μs) | 5kA | |||||
| Response time | ≤1ns | |||||
| lnsertion loss | ≤0.3dB304 | |||||
| Shell material | Waterproof and explosion-proof shell | |||||
| Protection circuit | Single-channel 1 and 2, double-channel 1,2, 3 and 4 | |||||
PRODUCT CATEGORIES
Focus on providing mong pu solutions for 5 years.
