News

HVAC control panel surge protection is not limited to installing one AC surge protective device at the panel incomer. A commercial or industrial HVAC cabinet may connect three-phase power, 24V…

Municipal and Industrial Electrical Protection Guide Water treatment plant surge protection cannot stop at one AC surge protective device installed in the main switchboard. Transient overvoltage can also enter through…

A wind turbine combines an exposed rotor, a conductive tower, long internal cables, high-power conversion equipment and sensitive control electronics. Effective wind turbine surge protection must therefore cover more than…

PV Combiner Box Protection and BOM Guide A PV combiner box fuse holder and a surge protective device may sit next to each other inside the same enclosure, but they…

Type 1, Type 2 and Type 3 are not three quality grades. They describe different SPD test duties and installation roles. A coordinated surge protection system must decide where each…

An outdoor CCTV pole is not only a camera support. It may connect a PoE cable, AC or DC power, BNC video, RS485 control wiring, a metal enclosure and a…

A remote I/O station, also called a distributed I/O station or field I/O node, places input and output modules close to sensors and actuators. It then connects the station to…

Street lighting surge protection is not a single-device decision. A project must decide whether protection is needed in the lighting distribution cabinet, at the pole base, close to the LED…